SEO Forum
Create your own forum and gain full access login Here.

How To: USB Cigar With LED at Tip

View previous topic View next topic Go down

default How To: USB Cigar With LED at Tip

Post by Admin on Thu Sep 02, 2010 7:50 am

How about a real Cigar that glows when connected
and stores data on the USB memory? You can build this authentic
smelling USB Cigar flash drive yourself in jest 10 or so easy steps.
Before you get started, here is a list of items you’ll need: Materials:

  • A thick cigar
  • An USB flash disk of small dimensions
  • Some wire, 2 x LEDs (red!), 1 x 10K resistor
  • Wood primer
  • Some tape
  • A short USB extension cable
  • Very thin paper, the size of a stamp
Tools:

  • Cutter
  • Drill and bits
  • X-Acto knives set
  • Files
  • Soldering iron, solder
  • Desolder kit (e.g. desoldering braid)
  • Hot melt glue and gun
Now here is the overview of How To make a USB Cigar:

  1. Bore out the Cigar
  2. Wood prime the internal leaves
  3. Take apart the flash drive for impregnating into Cigar
  4. Add a power on LED
  5. Insert electronics into Cigar body
  6. Glue the ends
  7. Enjoy
There is clearly better and more detailed instructions over at Instructables. Check it out to see if this project is in the scope of your abilities.
avatar
Admin
Sword
Sword

Posts : 164
Points : 1204
Reputation : 0
Join date : 2010-08-27
Age : 32
Location : India

http://www.shaileshtripathi.in

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum